20
February 2022
Installation, Operation and Maintenance Manual
MAN 607 Rev. 6
Section 3: Operation and Use
Operation and Use
For the adjustment of the mechanical stop screwed into the left side of housing, follow these
steps (Figures 19 and 20):
•
Loosen the locknut (d) with the specific wrench (c2).
•
Adjust the pin (g)/screw (v) with the adequate wrench (c1).
•
Turn counterclockwise to increase the angular stroke, turn clockwise to decrease it.
•
When the adjustment is over, tighten the locknut (d).
Actuator Model
Wrench C1 (mm)
Wrench C2 (mm)
0, 1
30
30
0, 3
30
30
0, 9
30
30
1, 5
41
41
3
41
41
6
46
46
Figure 19
Mechanical stop on housing
Table 5.
