26
B.
Tap
Board configuration
to display the
Board configuration
page.
C.
Select either
No holder switch
(1) or
With holder switch
tab (2) and set the
instrument type for each holder.
Note:
The instrument in use displays a green border and check mark (3).
6.2.1 Change instrument
A.
Tap the holder with the instrument to change, select the instrument or No
instrument connected.
B.
Select whether the instrument is active when the holder switch is closed or
open and tap to acknowledge configuration is done.
Note:
If you select MX-i motor you will have to select whether a peristaltic pump is
installed and wired (tap
Enable pump control
) or not (tap
Disable pump control
). Soft-
FIG. 31
FIG. 32
3
2
1
