7. Four USB connectors for additional USB devices
8. Line Out jack
9. Line In jack
10. Microphone jack
11. Three PCI mounting places of which you use first and second.
12. Power Supply connector
Installation
In this chapter we will guide you through the process of adding new functionality, mounting of
the appliance and connecting it to the network and power supply.
First, we will explain how to expand the appliance's functionality in the subchapter "Installing
PCI cards," where details about adding cards will be presented. In the chapter OfficeBOX
mounting we will explain where and how an officeBOX appliance can be mounted.
Software setup is described in another document which is also available from the website.
Installing PCI cards
Although officeBOX is a fully functional communication appliance, new functionality can be
added by installing various PCI cards. You can add PSTN, ISDN or E1/T1 functionality of your
choice, and with an enclosed PCI riser it is possible to add two cards into officeBOX.
A list of supported devices is available on Bicom Systems website:
http://downloads.bicomsystems.com/pbxware_finder/pbxware-finder-1.0.exe
The procedure of installing new cards is simple and we will take you through it step by step.
Top cover removal
Remove the top cover by removing three screws, one on the right side and two on the left side.
Then, by placing four fingers of both hands on the cover and using thumbs to push the front of
the appliance, pull the cover slightly towards yourself as in Figure 12. Once the cover is
released from its locks, you can take it off.