Step 11. When the booting is finished enter root for login and pbxware for password
■
Step 12. Enter dd if=/dev/sda of=/dev/hda to transfer PBXware to the appliance
■
Step 13. When dd is finished, you must reboot appliance by issuing reboot command
■
Step 14. When appliance starts booting take out the USB stick so the appliance boots
■
from the Hard Drive. If the bootup procedure went without any problems, system is
ready for Setup Wizard and licensing by the end user.
If for some reason step 12 didn't finish properly, you should find out how the system sees USB
stick and Hard Drive. That is done by issuing the cat /proc/partitions command. Disk is usually
recognised as /dev/hda and USB stick as /dev/sda, but if they are recognised differently, put
those in the step 12 acordingly.
Retrieved from "http://wiki.bicomsystems.com/Applicanes_OfficeBOX_Installation_Guide"