f) Equipment modifications
Do not make any hardware modifications to the equipment. Bicom Systems is not responsible for
any damage or injury as a result of the equipment modification.
g) Ventillation
Although officeBOX does not use active cooling, it will not overheat within defined room
temperatures. Nevertheless, good ventillation space is required for the proper working of the
appliance. Openings on the appliance must not be covered or blocked and should be kept free
from dust.
h) Placement
Openings on the top cover are meant as a ventillation of any small amount of exccess heat that
is not transfered to the side aluminium cooler, and they should be free. That means that you
should place the appliance in a well vented place.
Do not put the appliance near a radiator or any other heat emmiting device. Doing so can cause
your appliance to overheat and malfunction.
i) Regulations and information
This device complies with the CE and FCC Rules and Regulations which can be obtained from
the supplier
Overview
Installation of the officeBOX appliance takes place in three steps:
Installation, explains the mounting process and physical connection to the network and
■
to a power source.
Adding new functionality by installing various cards.
■
Software Setup, explains the process of setting up the appliance in a network
■
environment using the web-based Setup Wizard
