26
rETrIEVE sWITCh TEsT rEsuLTs
switch Test results
Once the test results have been taken
they can be retrieved by pressing the Test
button which will show the last result. This
data is stored until the next Switch Test run
has been completed.
switch Contact status
When in the Switch Test mode the Set LED
shows the switch contact status. If the
switch contacts are normally closed the
LED will be on. If the contacts are normally
open the LED will be off.
set
Test
E 1801
P 1800
Contacts Closed
P 2000
Contacts Open
runnIng ThE TECAL 700 from A pC
The Tecal 700 can be run from a PC using our TechneWorks software.
This software is available free of charge to download from the Techne web-sites at www.techne.com or
www.techneusa.com
Connecting the unit to the computer using a usB cable
When connecting The Tecal 700 to a PC for the first time using USB connection the next available comms
port will be allocated.
The hardware wizard will direct you through the installation for a USB to UART connection.
Techneworks includes a help file giving full instructions for use with the Tecal 700.
set
Test
P 1500
Exit switch Test program
When in the Switch Test mode the test run
may be stopped at any point by pressing
the Set button. The unit will then return to
the normal set point temperature.
