Program Passwords:
Enables an administrator to change the password for any program.
Sys Admin Password:
Allows the administrator to change the administrator password.
System Test:
Initiates a simple diagnostic test.
Controller Reset:
Allows the user to restore the factory settings.
Card Utilities:
Using this function SmartMedia cards can be formatted or all files can be deleted.
System Configuration:
This sub-menu allows the user to change the format of dates, times and
temperature units. Language, auto restart settings and the comms address can also be altered.
Additionally information relating to the heated lid and cycle count of the block is stored in this section
of the software.
47
The following functions are located within the System Administration menu:
PROGRAM PASSWORDS
Selecting the "Program Passwords" function
allows the user to change the passwords for
any password protected program. First touch
the screen to select the program for which
the password needs to be changed and then
select "Change PWord". To change the
password simply type the new password by
touching the letters/numbers and then
confirm by pressing "Enter". It is then
necessary to confirm the new password by
re-typing it.
SYSTEM ADMINISTRATION PASSWORD
Selecting "Sys Admin Password" enables the
user to change the initial administrator
password.
The screen shown opposite is then displayed.
To change the password simply type the new
password by touching the letters/numbers
and then confirm by pressing "Enter". It is
then necessary to confirm the new password
by re-typing it.
New system administrator password
Q W E
R
T
Y U
I
O
A S D
F G H
J
K
L
Z
Num
X C V B N M
Enter
➔
Cap
Space
➔
BS Cancel
P
Select Program
b 2 STEP PCR TEMPLATE
b 3 STEP PCR TEMPLATE
b ICE BUCKET
b LITIGATION 15 DEGREES
b RT PCR TEMPLATE
Change
PWord
Exit
▼ ▼
TC512 Techne Manual 19/12/08 3:30 PM Page 49
