Bibby Sterilin Techne 3Prime, Operator'S Manual

Page: 39 / 56

ramp rate
●
Touch the ramp rate setting to adjust the ramp rate.
The range is 0.1ºC/s (minimum) to 3.0ºC/s maximum for
heating and 2.1ºC/s for cooling. The value can be entered to
1 decimal place. Ramp rate will affect the heating or cooling
rate from the previous step to the current step.
●
Once set, touch ok to return to the Programming Screen.
Delete a stage
●
To delete a stage, touch the stage area to highlight it and
then touch
Delete .
Insert/Delete a steP
Insert a new step
●
Touch
Insert a new step
to insert the next step in the
current stage.
●
Edit the new step temperature, hold time and ramp rate
as required.
Delete a step
●
To delete a step, touch the area near to the step number
to highlight it and then touch
Delete
. More than one step
can be selected at a time.
Insert/Delete a Pause
Insert a pause
●
To insert a pause between stages, touch
Insert a pause
.
The hold temperature will be that of the previous step. The
unit will not continue with the remainder of the program
until it is manually un-paused by the user.
Delete a pause
●
To delete a pause, touch the pause button to highlight it
and then touch
Delete
.
note : To insert a pause between two previously programmed
stages, it is necessary to first delete the later stages to where
the pause is required.
Continue adding stages and steps as required. Use the
up and
down arrow
buttons to scroll through the program as
necessary.
37