InstallatIon
see also the safety Information sections on pages 5 to 14.
Front view
rear view
1. Lid adjustment knob (
3
PrimeX and G only).
1. USB port for service and calibration only.
2. Lid release latch.
2. On/Off rocker switch.
3. 3.5” colour VGA LCD touch screen display.
3. Mains cable inlet.
4. USB port for memory stick.
17
Prime
3
1
2
3
4
1
2
3
Prime
3
Installation
Place the unit on a suitable flat bench, ensuring
1.
that the air inlet vents on the sides are free from
obstruction.
Plug the mains cable into the socket on the back
2.
of the instrument.
Connect to the mains electricity supply with the
3.
plug provided or one wired correctly for the
supply. Switch the power ON using the switch
located on the rear of the unit. The front display
will then light up.
Release the heated lid by lifting the latch forward
4.
and use it to lift the lid. To close the lid, lower the
lid onto the block and press the latch to secure in
place.
Place the samples in the block. If individual tubes
5.
or strip tubes are being used, space these out
evenly across the block to equalise the pressure
from the heated lid.
Summary of Contents for Techne 3Prime
Page 1: ...3 Prime 3 PrimeX and 3 PrimeG operator s manual Issue 1 1 03 12...
Page 2: ......
Page 55: ......
