Biasi Riva ADVANCE SV, Owner'S Manual

Page: 6 / 24

6 RIVA ADVANCE USER MANUAL
IMPORTANT INFORMATION
Please read this page carefully.
• ALL BOILERS MUST BE INSTALLED IN ACCORDANCE WITH NATIONAL, STATE
AND LOCAL PLUMBING, HEATING AND ELECTRICAL CODES AND ORDINANC-
ES, AS WELL AS THE REGULATIONS OF THE SERVING ELECTRICAL, WATER
AND GAS UTILITIES.
• All systems should be designed by competent contractors, and only persons
knowledgeable in the layout and installation of heating systems should attempt
the installation of any boiler. It is the responsibility of the installing contractor
to see that all controls are correctly installed and operating properly when the
installation is completed.
• This boiler is intended for use, only with propane or natural gas. All flammable
liquids (especially gasoline), chemicals, rags, paper, wood scraps, debris, etc.,
should be kept away from the boiler at all times. Keep the boiler area clean and
free of all fire hazards.
• Please read the literature and warranties supplied by the manufacturers of the
various accessory equipment. This equipment is warranted by the respective
manufacturers, not by Quincy Hydronic Technology, Inc. Each piece of equip-
ment must be installed and used according to the recommendations of the man-
ufacturer.
Codes and Regulations:
Installation of the boiler and related equipment must conform to national, state and lo-
cal regulating agencies and codes applicable to the installation of the equipment. In the
absence of local requirements, the following codes apply:
A. ANSI/NFPA - #70 National Electric Code
B. ANSI/NFPA - #211 Chimneys and Vents
C. ANSI/NFPA - #Z223.1 National Fuel Gas Code
C. ANSI/NFPA - Domestic Gas Conversion Burner
D. CAN/CGA - B149 Installation Codes
E. ANSI/ASME - CSD-1
The above codes are available from:
National Fire Protection Association (NFPA)
CANADIAN STANDARDS ASSOCIATION
Battery March Park STANDARDS DIVISION
Quincy, Massachusetts, 02269 5060 Spectrum Way, Suite 100
http://www.nfpa.org Mississauga, Ontario, L4W 5N6