D.h.w. flow switch, filter
30
If on the M96.28SM/... and M96.32SM/... model the flow
rate of the d.h.w. circuit is too high, it is possible to limit
it by installing a flow limiter. The following sizes are avail-
able:
Nominal flow rate (litres/min)
Colour
10
Blue
12
Red
14
Pink
To install the flow limiter:
1
Remove the flow switch group as explained in the
section 14.5.
2
Remove the flow switch plug 1 from the body 4.
3
Fit the flow limiter in the plug.
4
Reassemble the group following the above se-
quence in reverse order.
