Biasi BASICA COND, User Manual And Installation Instructions

Page: 81 / 88

- 81 -
MAINTENANCE
MAINTENANCE
ward), until the LCD display shows the
code P06 , indicating entry into “parameter
P06” (Fig. 10.21).
Fig. 10.21
bar
RESET
• Press the 16 key to show the value of
parameter P06 on the LCD display (Fig.
10.22).
Fig. 10.22
bar
RESET
• Press the 16 key and the LCD display
shows the number 01 , indicating activa-
tion of the “chimney sweep function” at
minimum output (Fig. 10.23).
• Press the 12 key (Fig. 10.19) to confirm
the value entered and activate the func-
tion.
Fig. 10.23
bar
RESET
Flue sweep function at maximum output
in domestic hot water mode
• Press the 16 key and the LCD display
shows the number 01 , indicating activa-
tion of the “chimney sweep function” at
minimum output in domestic hot water
mode.
• Press the 12 key (Fig. 10.19) to confirm
the value entered and activate the func-
tion (Fig. 10.24).
Fig. 10.24
bar
RESET
Flue sweep function at maximum output
in heating mode
• Press the 16 key and the LCD display
shows the number 03 , indicating activa-
tion of the “chimney sweep function” at
maximum output in heating mode.
• Press the 12 key (Fig. 10.19) to confirm
the value entered and activate the func-
tion (Fig. 10.25).
Fig. 10.25
bar
RESET
Exiting the chimney sweep function
• To exit the chimney sweep, reset the value
of parameter P06 to 00 or wait 15 minutes
with the boiler switched off ( OFF ).
• Switch off the boiler by pressing button 17
(Fig. 10.19) until the letters OFF appear
on the LCD display (Fig. 10.26).
Fig. 10.26
bar
RESET