- 68 -
INST
ALLA
TION
ADVANCED COMMISSIONING
Press button
to display the
K REG
window (Fig. 8.13).
Fig. 8.13
It is possible to change the value using but
-
tons
and
.
Press button to exit from mode
(Fig. 8.13).
8.3 Setting the pump post-circula-
tion
The pump, in heating function, is set for a
post-circulation of about one minute at the
end of each heat request.
This time can be changed by a minimum of
zero to a maximum of four minutes.
•
Enter in "programming mode" by sequen
-
tially
pressing keys 16 - 17 - 18 (Fig. 8.14)
for 10 seconds at the same time until the
letters
Pr
that alternate with code
01
are
displayed on the LCD display, indicating
that "parameter 01" (Fig. 8.15) has been
activated.
Fig. 8.14
14
15
16
17
18
Fig. 8.15
•
Scroll the various parameters using keys
17 or 18 until the letters
Pr
that alternate
with code
11
are displayed on the LCD
display, indicating that "parameter 11"
(Fig. 8.16) has been activated.
Fig. 8.16
•
Press keys 16 and 18 (Fig. 8.14) at the
Summary of Contents for ADVANCE 25C
Page 87: ......
