- 64 -
INST
ALLA
TION
COMMISSIONING
Fig. 7.17
11
12
13
14 15
16
17
18
19
Fig. 7.18
• Scroll the various parameters using keys 17
or 18 until the letters
P15
are displayed on
the LCD display, indicating that "parameter
15" (Fig. 7.19) has been activated.
Fig. 7.19
• Using keys 17 or 18 it is possible to change
the value of parameter 15 from a minimum
of
01
to a maximum of
60
based on the se-
lected bend of the K coefficient in Fig. 7.16
(the value read on the display corresponds
to K coefficients decimal values).
The writing
P15
-
SEt
alternates on the dis-
play (Fig. 7.20).
Fig. 7.20
• By pressing key 14 (Fig. 7.17) confirmation
of the inserted value is obtained.
• Press keys 17 or 18 (Fig. 7.17) to exit with-
out changing the value Fig. 7.19)
• Exiting the “programming mode” is auto-
matic, after 15 minutes, or by cutting power.
At this point the plant flow temperature will fol-
low the trend in relation to the K coefficient set.
However, if the ambient temperature is not
comfortable, the flow temperature of the heat-
ing plant can be increased or reduced by ±
15°C by acting on keys 17 (reduce) and 18
(increase) (Fig. 7.17).
Fig. 7.21
C.h. flow
temperature °C
20
20 15 10
5
0
-5 -10 -15 -20 -25
30
40
50
60
70
80
-15 °C
+ 15 °C
External temperature °C
K = 1,5
Summary of Contents for Activ A 30C
Page 83: ... 83 MAINTENANCE MAINTENANCE Fig 9 25 Winter Summer ...
Page 84: ... 84 NOTES ...
Page 85: ... 85 NOTES ...