EN
17
Operating the Tamper T42M
Run the tamper only through the lid opening of the measuring beaker. (see Fig. 2, page 1). Use only the provided tamper and
NO OTHER objects to press the mixing content towards the blades. The less water you use, the more you have to work with
the tamper. If you use other objects, the device can be damaged.
Overview
With the aid of the tamper you can remove any air bubbles, e.g. when preparing dough, in the mixing container, without
touching the blades. With the integrated temperature gauge you can make sure your foods are prepared gently.
To measure the temperature in the mixing container, please proceed as follows:
• Switch on the tamper with the On/Off button
• Take the measuring beaker off the lid, leave the lid on the mixing container.
• Now hold the tamper into the mixing container through the opening.
• The handle of the tamper displays the temperature in °C.
Note
If the display shows the temperature in °F (Fahrenheit),
you can change into °C (Celsius) by holding the On/Off button of the tamper.
Changing the battery
(Battery type: CR 2032)
• Unscrew the upper part of the housing by turning it anti-clockwise.
• Now carefully pull out the display from the tamper.
• Use a coin to remove the old battery and insert a fresh battery.
• Place the display into the grip and screw the upper part of the housing tight.
Dispose of the used old battery at the provided collection points
Temperature
On / Off button
M
Solito
