25
Fig. 4.30
Fig. 4.31
Fig. 4.32
Fig. 4.33
4.6.2 Product selection label application
Unscrew the knobs and remove the case. Unscrew the four sup-
porting screw and remove the push button panel support located
at the back of the vertical token device casing (Fig.4.30).
Insert in the appropriate side slots of the keys the lables accordino
to the following lay out (Fig.4.31) :
- Sugar
+ Sugar
Extra Milk
No Cup
Espresso coffee
Black coffee
White coffee
Cappuccino
Espressochoc
CapCioc
Espreso coffee Dec
Black coffee Dec
White coffee Dec
Cappuccino Dec
Espressochoc Dec
CapCioc Dec
Milk
Milk with coffee
Milk and cocoa
Not
available
Chocolate
Strong chocolate
Chocolate with milk
Not available
Hot water
Cup
4.6.3 Cup loading
Use only cups suitable for automatic vending machines,
(check
the relevant features by consulting the chapter 1.2 “Technical
Specifi cations.”), avoid compressing the cups between themse
lves
during the loading. Don’t try to rotate the turret manually.
First fi lling
In installation phase with the cup dispenser completely empty,
operate as follows:
Mod. BVM971 - BVM951
– Check that the cup column is not aligned with the distribution
outlet, then fi ll all the columns proceeding in an anti-clockwise
sense, opposite sense (when the column is aligned with the
distribution outlet), close the door and switch on the machine
so that the cup column rotates and automatically places itself
in a position in which it is not aligned with the inlet and then
proceed to fi ll (Fig.4.32)
– Put the cup turret’s lid back on and snap in the spring band
(Fig. 4.33).
Normal fi lling
The cup column should normally fi lled with the machine off, simply
by opening the front door, lifting the lid and inserting the missing
cups.
