Biamp Systems, Inc., as the manufacturer, hereby declares that the following described product, in our
delivered version, complies with the provisions of the DIRECTIVES except as noted herein. In case of
alteration of the product, not agreed upon or directed by us, this declaration is no longer valid.
Product Model: ADVANTAGE
SPM723
Product Description: Digitally Controlled Stereo Preamp/Mixer
Applicable EC Directives: EMC Directive (89/336/EEC), LVD Directive (73/23/EEC)
Applicable Harmonized Standards: EN55103-1 emissions EN55103-2 immunity EN60065 safety
Special Considerations for Product Environment or Compliance:
Shielded cabling must be used for system connections. The apparatus is deemed incapable of
producing harmonic emissions or flicker levels sufficient enough to interfere with other apparatus as
noted in EN61000-3-2 and EN61000-3-3.
This apparatus operates from a removeable external power source at voltages below the levels
encompassed by the LVD. The external power source complies with the applicable requirements of
EN60065. The apparatus itself is outside of the scope of the LVD and presents no hazardous
voltages, as defined in the LVD. For compliance, the apparatus shall be powered only from the
separate CE marked Biamp Systems power source.
RF interference conducted through interconnect cabling may cause varying degrees of random
signal degradation. The effect of increased noise or distortion due to this interference is typically
masked by the desired signal. In no instance is operation inhibited.
The Technical Report/File is maintained at:
Biamp Systems, Inc.
10074
S.W.
Arctic
Drive
Beaverton,
OR
USA
97005
phone:
(503)
641-7287
fax:
(503)
626-0281
e-mail:
Authorized Representative: Steven Hedgepeth
Authorized Representative Signature:
Issued: June, 2000
Declaration of Conformity