page 2
Installation Guide
Model P30DT
CAUTION:
Installation of these loudspeakers should only
be performed by trained and qualified personnel. It is
strongly recommended that a licensed and certified
professional structural engineer approve the mounting. It is
essential that all installation work involving the suspension of these
loudspeaker products be performed by competent, knowledgeable
persons who understand safe rigging practices. Severe injury and/
or loss of life may occur if this product is improperly installed.
UNPACKING / INSPECTION
The
loudspeakers
are engineered and manufactured to be
rugged and they are carefully packed in sturdy cartons. However,
it is recommended to thoroughly inspect each unit after it has
been removed from the packaging, as damage could occur
during shipping.
Please note that once the shipment has left your dealer or the
factory, the responsibility for damage is always borne by the
freight company. If damage has occurred during shipping, you
must file a claim directly with the freight company. It’s very
important to contact the freight company as soon as possible
after receiving your shipment, as most freight companies have
a short time limit within which they will investigate claims. Make
sure to save the carton and the packing material, as most claims
will be denied if these materials are not retained. Your Biamp
dealer and the factory will try to help in any way they can, but it
is the responsibility of the party receiving the shipment to file the
damage claim.
It is always a good idea to retain the carton and packing
materials, if possible, in the event that the unit may need to be
returned to your dealer or distributor for repair in the future.
IMPORTANT:
Biamp is not responsible for damages
resulting from the negligent installation of any
loudspeaker.
WARNING:
Please make sure that the mounting
structure is capable of safely supporting the
loudspeaker’s weight.
In the Carton
Each carton contains the following:
• Loudspeaker (x1)
• End cap with integrated cable cover (x1)
• Gripple snaphook cable 5m (x2)
• Gripple express locking device (x2)
• Important safety instructions (x1)
Loudspeaker wiring not included
IMPORTANT INSTRUCTIONS
Read and follow the Safety information included in the carton.
IMPORTANT:
This loudspeaker is designed for indoor use only,
and should not be installed in wet or damp environments, or in
locations where moisture or water may enter the loudspeaker.
Refer all servicing to qualified service personnel. Servicing is
required when the loudspeaker has been damaged in any way,
such as liquid has gotten into the device, the loudspeaker does
not operate normally, or has been dropped.
The terms CAUTION, WARNING, and DANGER may be
used in this manual to alert the reader to important safety
considerations. If you have any questions or do not understand
the meaning of these terms, do not proceed with installation.
Contact your local dealer, distributor, or call Biamp directly for
assistance. These terms are defined as:
CAUTION:
describes an operating condition or user
action that may expose the equipment or user to
potential damage or danger.
WARNING:
describes an operating condition or user
action that will likely cause damage to the equipment
or injury to the user or to others in the vicinity.
DANGER:
describes an operating condition or user
action that will immediately damage the equipment
and/or be extremely dangerous or life threatening to
the user or to others in the vicinity.
These installation instructions are for use by qualified personnel
only. To reduce the risk of fire or electric shock do not perform
any servicing other than that contained in the operating
instructions unless you are qualified to do so.
