Model P30DT
Installation Guide
page 3
LOUDSPEAKER INSTALLATION
To install the pendant loudspeaker, do the steps
that follow:
1. Thread the snaphook cable through the opening in
the locking device (Gripple) in the direction of the
arrow shown on the unit (1). See Figure 1a.
2. Loop the snaphook cable over or through a secure
structure, and pass the cable back through the
Gripple, using the closest opening (2). Pressing
the appropriate button will allow the cable to move
through that side of the device (Figures 1a & 1b).
3. Repeat steps 1 and 2 for both the primary and
secondary suspension cables (Figure 1c).
Push button to
release tension /
unlock cable
Push button to
release tension /
unlock cable
Figure 1a.
Insert cable in the
Gripple, over or through support
and back through Gripple
Figure 1b.
Support cable with Gripple
attached correctly
A minimum of 3"
(75mm) of cable must
protrude from Gripple
2
1
Figure 1c.
