page 6
Installation Guide
Model P30DT
INSTALLATION
(continued)
10. Attach the end cap by placing it around the
suspension and loudspeaker cables. Make sure
the end cap is held firmly in place with the magnets
(Figure 8).
11. Ensure the tether is securely inserted in the cable
cover and end cap sockets (Figure 9a). Clip the cover
into the end cap (Figure 9b).
12. Rotate the end cap so that the secondary cable does
not press against the cable cover. There should be
enough slack in the secondary cable that it doesn't
rub against either the end cap or cable cover
(Figure 10).
Secondary cable
Figure 8.
Figure 9a.
Figure 9b.
Figure 10.
