background image

   page 8 

        

Installation and Operation Guide 

NPX

Function

Navigation

LCD

Description

Playback Failed

N/A

Displays briefly when the user tries to 

play back a message with a non-existent 

recording.

Destination Busy

Press 

1

 to go to previous page code.

Press 

2

 to go to next page code.

Displays when at least two paging stations 

are connected to the same network and a 

message is already playing on one of them.

-OR-

A high priority page code interrupts the 

lower priority page code.

OPERATION (CONTINUED)

Paging and Message Playback LCD Button Navigation

Message Recording Instructions

Record a message

1. From the Page Code (default) screen, press and hold the bottom LCD

screen button and then press the top button to go to the Recordings

screen.

2. Press the top or middle LCD buttons next to 

 to navigate to and

highlight a specific recording slot.

3. Press the bottom LCD button next to   to enter the selected Message

Slot screen.

4. Press the top LCD button next to the record button

 to go to the 

Record Message screen.

5. Press and hold the PTT button, speak into the microphone to record the

message and release the button when done. On gooseneck models the

user may also tap the latching button, speak into the microphone to record

the message and tap the button when done.

6. Press the top LCD screen button next to

 to save the recording.

7. Press the middle LCD screen button next to   to delete a recording.

Press Yes or No to continue.

Navigation

See the 

navigation table

 for LCD navigation during recording activities 

and 

LCD icons

 for descriptions.

2

1

3

Summary of Contents for NPX G1040
















Reviews: