background image

   page 2 

        

Installation and Operation Guide 

NPX

Figure 3: NPX Back Panel

Figure 1: NPX G1100 Front Panel

Front

1.

LCD Menu Navigation Buttons

Up, Down and Select buttons allow the user to

 

navigate the LCD menu.

2.

LCD

Allows the user to view menus and functions.

 

See 

Operation

 for more details.

3.

Page Code Selection Buttons

Defines a voice-paging operation including its

 

type, destination and priority.

4.

Microphone

5.

Page Status LED Indicators

Indicates if the user is in Talk/Don’t Talk modes:

6.Press-to-Talk (PTT)

Allows the user to initiate announcements while

holding the PTT button is down. The page ends 

when the PTT button is released.

6a. Latching Button (gooseneck only)

Keeps a page active until the button is pressed 

again or the PTT button is pressed.

NPX HANDHELD/GOOSENECK FRONT & BACK

Back

7. Removable Foot

The removable foot allows for flat surface and

wall mounting.

8. Back Plate

The removable back plate supports wall

mounting.

NOTE:

 Marking plate (regulatory label) located at the 

bottom of the unit

.

1

6

4

5

2

3

4

8

1

2

3

5

7

6

6a

Status

LED Indicator

Talk Now PTT

Right LED Green Solid

Talk Now Latching Right LED Green Pulsing
No Talk

Left LED Red Solid

Wait

Left LED Yellow Solid

Figure 2: NPX H1100 Front Panel

Summary of Contents for NPX G1040
















Reviews: