NPX
Installation and Operation Guide
page 11
OPERATION (CONTINUED)
Keypad
NPX H1040/G1040 4-Key Keypad
Type
Buttons
Function
10-Key Keypad 0,1,2,3,4,5,6,7,8,9 Page Code Assignments
4-Key Keypad
A,B,C,D
0,1,2,3,4,5,6,7,8,9
Page Code Assignments (Letters)
PIN Code (numbers)
NPX supports 10 push buttons for the 10-key and 14 push buttons for the
4-key as shown in the table below:
Keypad Functionality
The 10-button station allows up to 999 page codes to be assigned. Users can
search for a page code by typing in the page code number on the keypad,
or by navigating to the next/previous page code with the top two navigation
buttons. A 4-digit PIN is required if the station is locked.
Page codes must be entered as 3 digits. For example, to show page code
nine, the user would enter 0-0-9. For page code 20 the user would enter 0-2-0.
The 4-button station allows up to four page codes to be assigned (one for each
of the four buttons A,B,C,D).
•
To unlock a station that has a PIN authorization, the user must repeatedly
press the same key to cycle through the numbers for that key and then
stop for 1.5 seconds until the displayed number is locked in.
Button ‘A’ : is used to enter the number 1, 2 or 3
Button ‘B’ : is used to enter the number 4, 5 or 6
Button ‘C’ : is used to enter the number 7, 8 or 9w
Button ‘D’ : is used to enter the number 0
•
To enter the PIN 4289 the user types the following sequence:
B, <wait>, A, A, <wait>, C, C, <wait>, C, C, C, <wait>
NPX H1100/G1100 10-Key Keypad
4-Button
10-Button
