background image

A:

 9300 S.W. Gemini Drive Beaverton, OR 97008 USA

           

T:

 +1 503.641.7287

           

W:

 

www.biamp.com

1

INSTALLATION MANUAL

IMPERA ALFA II

000.0000.000

WHAT IS IN THE BOX?

The box contain the following items:

• 1 x Impera - ALFA II
• Power cable
• Cable relief bracket
• Cable relief cover
• Phoenix connectors
• Screws
• Cable binders
• Installation manual

IMPORTANT SAFETY INSTRUCTIONS

Caution:

Read these instructions:

Read and understand all safety and operating instructions before using the equipment.

Keep these Instructions:

The safety instructions should be kept for future reference.

Heed all Warnings:

Follow all warnings and instructions marked on the equipment or in the user information.

Avoid Attachments:

Do not use tools or attachments that are not recommended, because they may be hazardous.

Warning!:

• This equipment should be operated only from the included power supply.
• To remove power from the equipment safely, remove all power cords from the rear of the equipment, or 

the desktop power module (if detachable), or from the power source receptacle (wall plug).

• Power cords should be routed so that they are not likely to be stepped on or pinched by items placed 

upon or against them.

• Do not defeat the safety purpose of a polarized or grounding-type plug. A polarized plug has two 

blades with one wider than the other. A grounding-type plug has two blades and a third grounding 
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit 
into your outlet, consult an electrician for replacement of the obsolete outlet.

• Unplug this apparatus during lightning storms or when unused for long periods of time.

Summary of Contents for IMPERA ALFA II












Reviews: