To detect an active data port, plug the unit into the port to be tested using
a short patch cable and press the button.
The display will show the type of data connection or service present from
the following list:
• Set the instrument to the desired VP and wiring scheme
(see section 4.4, 4.5, 4.11).
• Make sure no Telecom Network Voltages or other services are
detected (see 5.1).
• Attach the instrument to one end of the cable to be tested
• Attach the remote unit to the other end of the same cable
• Press the
button.
5.2 Service Detection
17
Token Ring
10base T
No Service
Unknown Service
5.3 General Operation
Structured Cable Tester
& TDR Fault Locator
Structured Cable Tester
& TDR Fault Locator
Pro
BI Communications
Innovation through Technology
18:24
LanCaster
Pro ST
03:11:05
TIA568 STP Vp=79%
Structured Cable Tester
& TDR Fault Locator
Structured Cable Tester
& TDR Fault Locator
Pro
BI Communications
Innovation through Technology
18:24
LanCaster
Pro ST
03:11:05
TIA568
STP Vp=79%
With
nd Discrimination Technology
EDT
™
E
Remote Unit
Remote Unit
1
BI Communications
Innovation through Technology
Summary of Contents for Lan Caster ProST
Page 2: ......
