Voyager Duo Programming
23
Fig. 15
Enable/Disable Return to Charge (RTC)
X
Turn the ceiling lift off by pulling on the red cord. The green LED will turn off.
Y
Press the PROG button on the hand control. At the same time, push up on the plastic insert switch. The green
light will flash, and you will hear three beeps.
Z
The red LED will then illuminate. You can now release the PROG button.
[
Press three times on the UP button (you will hear three beeps) to enable/disable the RTC.
\
Now press the PROG button to confirm the selection.
]
Using the left button, select one of the four predetermined selection.
^
Now press the PROG button to confirm the selected return to charge.
_
Press UP to continue within the programming mode, or to return to regular mode, pull on the red cord, then
push up on the plastic insert switch.
Exit programming
mode
To select
another feature
Return to the
last charging
station
travelled.
Disable
(factory
default)
Enable left
Enable right
Entering the Programming Mode
Set Return to Charge Option
Final Steps
