Voyager Duo Programming
22
Fig. 14
Adjusting the Spreader Bar Height
X
Turn the ceiling lift off by pulling on the red cord. The green LED will turn off.
Y
Press the PROG button on the hand control. At the same time, turn on the ceiling lift by pushing up on the
plastic insert at the top of the red cord. The green light will flash, and you will hear three beeps.
Z
The red LED will then illuminate. You can now release the PROG button.
[
Press twice the UP button (you will hear two beeps)to change the spreader bar height.
\
Now press the PROG button to confirm the selection.
]
The strap will begin winding up. Once it is completely wound, press the UP and DOWN buttons to set the
height the spreader bar’s rises to once it is sent to the charging station.
^
Now press the PROG button to confirm the selected height.
_
Press UP to continue within the programming mode, or to return to regular mode, pull on the red cord to turn
the unit off, then push up on the plastic insert to turn it on.
Entering the Programming Mode
Spreader Bar Height
Adjustment
Final Steps
To select
another feature
Exit programming
mode
