12
3) Then put the hairband for 4 minutes in cold
water to fi x the bend position of the hair-
band. Again, take care that the cableholder
made of rubber are not touching the water.
4) Finally, mount the electronic housing, bone
conduction receiver housing and cable onto
the hairband.
Cleaning of wearging system hairband:
Make sure that before cleaning the
wearing system hairband, electronic housing
max
2) Bend the hairband according to the size of
the head of the patient to get the best fitting.
Fig. 1
80°C
4 min.
max
Fig. 2
Cold
4 min.
Fig. 3
