11
Bending of the hairband:
To optimize the fi tting of the wearing system
hairband, we recommend you to adjust the
hairband by bending, using the following
procedure:
Follow this procedure as shown step by step.
Attention:
Risk of burning: Please keep
children away from the area whilst following
this procedure!
1) Remove the electronic housing, bone
conduction receiver housing and cables
from the wearing system.
Then put the hairband, as shown in picture
1, in a suitable vessel, fi lled with hot water
(80 degrees Celsius) for 4 minutes. Take
care that the cableholder made of rubber
are not touching the water.
For using the system as a hairband set up,
the snap fastener on the bone conduction
receiver housing is removed and will be
covered with a protection cap (8), which is
part of delivery.
