BH LK700RW, Owner'S Manual

Page: 15 / 29

15
ASSEMBLY INSTRUCTIONS
ITEM Description Qty
K01 Phillips screw (stainless) 2
K02 Phillips screw (stainless) 6
K03 Phillips screw (ST) 4
K04 Hex screw (steel) 12
K05 Spring washer 12
K06 Washer 3
K07 Hollow screw 3
K08 Bushing screw 3
K09 Washer 4
K10 Hex screw 4
K11 Spring washer 3
K12 Hex screw 2
K13 Hex Phillips screwdriver 1
K14 Hex wrench (5mm) 1
K15 Hex wrench (4mm) 1
K16 Washer 12
K17 Phillips screw 4
STEP 1: Attaching the Main Frame to the
Front Support
Use 4-(K04) Screws, 4-(K05) Spring
Washers, and 4-(K16) Washer to attach the
(A) Main Frame to the (B) Front Support.
Tighten securely.
STEP 2: Attaching the Rail to the Rear
Support and assembling the Seat
Attach the (C) Rear Support to the (D)
Rail, using 4-(K04) Screws, 4-(K05) Spring
Washers, and 4-(K16) Washers. Tighten
securely. Slide the (E) Seat onto the (D)
Rail, then install the (K) Rail end cap with
4-(K17) Phillips Screws. Tighten securely.
STEP 3: Connecting the Rail to the Main
Frame
Take the Rail Assembly (A) and slide it
on to the Main Frame (D). Secure the rail
on the side with 3-(K07) Hollow Screws,
3-(K11) Spring Washers, 3-(K06) Washers
and 3-(K08) Bushing screws. Secure the
bottom of the rail with 4-(K04) Hex
Screws (Steel), 4-(K05) Spring Washers and
4-(K16) Washers. Tighten Securely.
A