background image

 

11 

1.  Casing  of  the  adjustable  legs of the front  and 

rear stands. Fig 11. 

2.  Transportation wheels U bracket surfaces. Fig 

11. 

3.  Front and rear stand bracket surfaces. Fig 12 

and 13. 

4.  Area  where  the  stands  are  clamped  to  the 

frame. Fig 14. 

5.  Joint between the pedal and the crank. Fig 15. 

6.  Joint between the crank and the central frame. 

Fig 15. 

7.  Chromed  handlebar  post  surfaces  and 

horizontal  surfaces  where  the  handlebar  post 

is locked. Fig 16. 

 
Application:  

Shake well before using. 

Hold the can 20 to 30 cm away from the surface to be 

sprayed using the extension tube. 

Wait two minutes until the product stabilises. 

Carefully spread with a clean cloth, leaving a light and 

uniform coat over the surface, and wipe off any excess. 

For areas with difficult access use a brush to apply the 

product. Leave to dry for about 3 hours. 

 
Handling Precautions 

Avoid all ignition sources (spark or flame). 

DO NOT allow the material to come in contact with 

eyes  or  skin.  Wear  appropriate  protective 

equipment  during  handling.  Keep  the  container 

closed. Avoid breathing vapours or mists. Use only 

with  adequate  ventilation.  Wash  hands  and 

contaminated clothing thoroughly after handling. 

 

Storage 

Keep  the  product  in  a  cool,  well-ventilated  area. 

Avoid  all  ignition  sources  (spark  or  flame).  Store 

between  4.4ºC  and  49ºC.  Store  all  materials  in  a 

dry, well-ventilated area. Avoid breathing vapours.

 

3.- Apply  the  BH indoor cycling protector (111)  with  a 

clean cloth to polish the product.  

 

Application:

 Application should be over the entire bike 

while this is dry. 

Spray  the  BH  indoor  cycling  protector  (111)  over  the 

surface to be treated. 

Then spread with a clean cloth. Wipe dry with the cloth. 

Do not let the product self-dry. 

 

Note: 

In  case  any  part  or  component  needs  to  be 

replaced,  follow  the  same  operations  described 

above. Use only original BH spare parts. 

PREVENTIVE MAINTENANCE OF THE MACHINE 

 

Every class 

1. The user must check that the apparatus is safe 

and appropriate for exercise. 
2.  A  cloth  or  towel  should  be  used  to  remove 

sweat after the session has ended. 

Weekly for the first month 

1. Check the tightness of the pedal and crank with 

a torque wrench. The tightening torque must be 46 

Nm.

 

 

Weekly 

1.  Thoroughly  inspect  each  apparatus  to  make 

sure it is in safe and proper working order. Check 

screws,  nuts  and  bolts,  pedal  cages,  handlebar, 

saddle, knobs, worn pedal straps etc. 
2.  Use  warm  water  and  a  cloth  to  clean  the  parts 

that are dirty or that are in continuous contact with 

sweat. 

 
3.  If  you  need  to  use  soap,  use  the  gentle 

MEGUIAR’S  NXT  soap,  which  will  not  damage  the 

paint.  In  this  case  follow  with  the  BH  indoor  cycling 

protector,  cleaning  the  area  with  a  clean,  dry  cloth. 

Wipe dry after. 

Monthly

 

1. Check the tightness of the pedal and crank with a 

torque  wrench.  The  tightening  torque  must  be  46 

Nm. 
2. Check and adjust the belt. 

If the belt slips it will be necessary to tighten it: 

- Remove the side covers (49) and loosen the nuts 

a maximum of two turns, Fig 7. 

- Tighten the small nuts with a spanner. Make sure 

that  the  nut  rotates  the  same  number  of  turns  on 

both sides of the machine (generally 2 turns will be 

sufficient)  otherwise  the  drive  sprocket  might 

become  skewed,  creating  a  lot  more  noise  and 

making it possible for the belt to fall off. 

- Tighten up the nuts again and put the side covers 

(49) back in place. 

- Whenever the tension on the machine has been 

adjusted, readjust the brakes as well. 
3. Wax those areas that are in contact with sweat. 

It is not necessary to wax the entire machine, but it 

is  very  important  to  wax  those  areas  that  are  in 

direct  contact  with  sweat,  since  these  are  more 

vulnerable to rust. 

Apply  the  BH  indoor  cycling  protector,  cleaning  the 

area with a clean, dry cloth. Wipe dry after. 
4.  The  3  tightening  knobs  should  be  loosened  off 

and  sprayed  with  Wurth  lubricant  to  ensure  that 

they remain operative. 

Annually 

1.  Clean  with  MEGUIAR’S  NXT,  adding  the  soap 

to  water  in  a  bowl.  Shake  to  create  foam.  Apply 

with a wet sponge and dry with a cloth. 
2. The areas shown  in Figures 11 to 16 should be 

protected  with  BH  rust  inhibitor  following  the  same 

procedure and then left to dry for 3 hours. 
3.  Apply  the  BH  indoor  cycling  protector  to  the 

cleaned area  with a clean,  dry cloth. Wipe  dry  after 

application. 
 

WARNING:  Failure  to  follow  the  cleaning  and 
maintenance  instructions  could  result  in  a 
reduced  working  life  of  the  apparatus  and 

serious  personal  injury  to  the  user.  Failure  to 
follow these instructions will void the warranty. 

 

 

 

Summary of Contents for H925ANT

























Reviews: