BH FITNESS Nevada plus G119X, Instructions For Assembly And Use

Page: 34 / 37

34
POSITIONING THE WEIGHT
SEECTOR ROD.-
24.- Insert the weight selector (44) rod
into the orifice of the weights required
for the exercise, as shown in Fig.17.
25.- When the rod notch has been fed
through the weight selector tube (22),
turn the selector (44)rod anticlockwise,
so that the rod is held into place as
shown in Fig.18.
Check that the selector is firmly in
position and that it does not protrude
from the weight selector. To remove
the rod, turn it clockwise and pull.
For optimum control of exercise
conditions, the weights are already
marked with letters.
By checking the equivalence charts on
the bottom of the apparatus, you will
be able to check the exercised
strength as the meaning of each letter
is expressed in kilograms and pounds.
FOLDING THE SEAT.-
26.- To fold the seat, pull the safety rod
(39) and lift it in the direction of the
arrow as shown in Fig.19. The same
rod is used to put the seat back up.
Note : The seat can be put into two
different positions.
LEVELLING.-
27 .-Once it has been firmly positioned
into place, check the base and ground
level of the machine. Levelling can be
improved by more or less swivelling
the adjustable feet (60) Fig.20.
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE.