16
STEP 5: Assemble the Rear Stabilizer
Lift the Upper Slide Track (D) off the ground and fit the Rear Stabilizer (C) into place. Use 6
Screws (J1) to tighten the Rear Stabilizer (C) into place on the Upper Slide Track (D)
STEP 6: Pedal Assembly and Adjustment
Slide the Right Pedal (F1) onto the Pedal Connection Tube (G). Use 1 screw (J1) and 1 washer
(J2) to secure it in place. For Pedal adjustment loosen the nut (F10) and the knob (F9), move
pedal to desired position and retighten the nut (F10) and knob (F9). Repeat steps for Left
Pedal assembly and Adjustment.
**IMPORTANT**
Be sure to install pedals on the
correct side so that the heel cup
is at the back of the pedal as
shown. Otherwise you will
experience slipping and could
fall out of the pedals.
FIGURE 5
FIGURE 6
Summary of Contents for LK500RW
