14
ASSEMBLY INSTRUCTIONS
STEP 1: Remove Components
Remove the components. Lay the machine and
packaging on the floor as shown in Figure 1.
Remove the components D & E from inside
the polyfoam as shown and set aside for further
assembly. Replace the polyfoam blocks in their
original positions. Flip the packaged assembly
up 90 degrees as shown in Figure 2.
STEP 2: Front Stabilizer Assembly
Place the front stabilizer (B) onto the main
frame and tighten into place using 4 screws
(J1) and 4 washers (J2).
USE TOOL
FIGURE 1
FIGURE 2
E
D
polyfoam
POLYFOAM(2)
B
J2
J1
A
POLYFOAM(1)
Summary of Contents for LK 580
