BH FITNESS H674U, Manual

Page: 8 / 21

Fix the cover (31). Set the handlebar in a comfortable position and tighten the
handle (29) turning clockwise, Fig.6.
7. FITTING THE ELECTRONIC MONITOR.-
Remove the screws (55) from the base of the monitor, connect the terminals
(59) (60) to those on the monitor (34), Fig.7, then slide the front of the monitor
down onto the plate on the main post (59), making sure not to snag any of the
wires, fit the screws (55) and tighten.
Insert the cover (33) Fig.7. Fix it with the screws (48) (50), Fig.7.
LEVELLING.-
Once the unit has been placed into its final position, make sure that it sits flat
on the floor and that it is level. This is achieved by screwing the adjustable
foot (4) up or down, Fig.8.
MOVEMENT & STORAGE .-
The unit is equipped with wheels (7) to make it easier to move about. The two
wheels at the front of the unit make it easier to place the unit in any chosen
position, as shown in Fig.9. Store it in a dry place, preferably not subject to
changes in temperature.
MAINS CONNECTION.-
Insert the jack (m) on the transformer (71) into the connection hole (k) on the
main body (bottom, rear of the machine) and then plug the transformer into a
220 V mains supply, Fig.10.
Do not hesitate to get touch with the Technical Assistance Service if you have
any queries by phoning customer services (see last page in manual)
BH RESERVES THE RIGHT TO MODIFY THE SPECIFICATIONS
OF ITS PRODUCTS WITHOUT PRIOR NOTICE