7
7
Take the long bolts (F) and place a
washer (G) on each bolt. Insert the long bolt
in order to join the pedals to the arms (figure
7). Finish off by placing a washer (O) and
self locking nut (H) on each long bolt and
tighten securely using the spanner, then fit
the trim caps (I) (figure 7A).
8
Fit the bottle holder lid (J) into its housing
on the main body (A). Then fit the front
cover (R) onto the main body (A). Figure 8
9
LEVELLING
Once the appliance has been placed into its
final position, make sure that it is level on
the floor. This can be achieved by screwing
the adjustable feet (S), at the back of the
machine, either in or out (figure 9).
10
MAINS CONNECTION (Mod G-236)
Insert the jack (T) into the connection hole
(Y), figure 10, and then plug the transformer
into a 220 V mains supply.
Always follow this advice when using
electrical appliances.
- Make sure that the mains supply voltage
is suitable for the machine before plugging
it in. The supply voltage should be 220 V
and the wall socket outlet must match the
plug on the machine. Do not use any type
of adapter.
- To reduce the risk of electrical shock,
always unplug the unit immediately after
use and before attempting to clean it.
- Never leave the unit unattended when it
is plugged in. Unplug it after use.
- Do not allow children or the disabled to
use the appliance without the strict
supervision of a qualified person.
- Never use accessories that are not
recommended by the manufacturer.
- Do not use the machine if the mains cable
becomes damaged or worn.
- Keep the mains cable away from hot
surfaces.
- Do not use the machine outdoors or in the
rain.
MOD. G235/236NDE 0180062
27/7/04, 17:30
7
