EN
EASYGO / EVO / NITRO / AWD / ATOM USER MANUAL
43
Energy Saving Modes
The battery has been designed to ensure a long service life. This is possible thanks to the energy saving modes
that prevent inefficient consumption of the battery:
•
Transport Mode (only during the first use)
In order to minimise internal consumption while transporting the bicycle from the factory to the store,
the battery is in Transport mode.
The user can finally exit this Transport mode by charging the battery to 100% before its first use.
ATTENTION
The AWD models are not approved under standard EN 15914 and are
therefore only intended for off-road use.
•
Stand By Mode
In order to minimise internal consumption, the battery automatically switches to Stand By mode.
This happens automatically when the system detects no charging, no discharging and no communication
with the battery for a period of 10 minutes. So, for example, this mode will automatically turn off the display
panel after 10 minutes without use, if the user has left it on after parking.
The user can exit this Stand By mode by simply turning on the bicycle's display panel.
•
Deep Sleep Mode
In order to protect the battery during long periods of inactivity or storage (for example, during the winter),
the battery automatically switches to Deep Sleep mode. This happens automatically when any of the
following situations occur:
•
If the charge level of the battery is below 1%, the battery goes into Deep Sleep mode when the
battery has continuously been in Stand By mode for 10 minutes.
•
If the charge level of the battery is below 10%, the battery goes into Deep Sleep mode when the
battery has continuously been in Stand By mode for 48 hours.
•
If the charge level of the battery is below 40%: Deep Sleep mode is activated when the battery has
continuously been in Stand By mode for 14 days.
•
If the charge level of the battery is below 80%: Deep Sleep mode is activated when the battery has
continuously been in Stand By mode for 30 days.
The user can exit this Deep Sleep mode by holding down the battery's SOC button (which
checks the charge level) for 5 seconds or starting to charge the battery with the charger.
Suitable Charging Environments
For safe and efficient charging, use the battery charger in a place that:
-
Is flat and stable (as it is on the bicycle).
-
Is free from rain and moisture.
-
Is out of direct sunlight.
-
Is well ventilated and dry.
-
Is not accessible to children or pets.
-
Has a temperature of between 15–25°C.
Summary of Contents for ATOM
Page 2: ......
