16
7. TRANSPORTATION
Abb. 9
Abb. 10
9
10
This machine is conceived for very ergonomic, easy handling thanks
to the special wheel arrangement in the rear bottom part of the ma-
chine. For long distance transportation, the machine can be conveni-
ently handled on the three-point linkage of your tractor.
To perform handling by rolling on its own wheels, first plug the pull-
rod (9) in the upper 3-point hitch and firmly secure it by means of the
pin. At this stage, find safe handling asset by leaning the splitter back
on the wheels till the wheels hit against the ground.
Alternatively lift the splitter using a crane or any equivalent lifting
equipment hooking the special lift bow (10) as shown on figure 10.
To perform transportation on the tractor, first lift the splitter
at least 20 cm above the ground while holding it straight up.
Disconnect power or remove the driveshaft and make sure that
the machine does not infringe the tractor profile nor blinds
tractor lights and signal lights (stop lights, tail lamps, etc...)
during transportation.
For road transportation compliance to the traffic rules of your
country is mandatory.