BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 1709
Clutch Aligning Tool Set
ATTENTION
Read the operating instructions and the included safety information carefully before using the product.
Use the product correctly, with caution and only for the intended purpose. Failure to observe the safety
instructions can lead to damage, injury and voiding of the warranty. Keep these instructions in a safe and
dry place for future reference. Include the operating instructions if you pass the product on to third parties.
INTENDED USE
These clutch aligning tool set enables precise centering of the clutch disc and is suitable for clutch disc
hubs with inner diameter from 15 to 26.6 mm.
SAFETY INFORMATIONS
•
Keep children and unauthorized persons away from the work area.
•
Do not let children play with this product or its packaging.
•
Make sure that the work area is adequately illuminated.
•
Keep the work area clean, tidy, dry and free of other materials.
•
Do not let untrained people work with this tool set.
•
Always work according to the vehicle manufacturer's instructions. This manual serves only to
illustrate the product and in no way replaces vehicle-specific service literature.
USE
Choose a appropriate clutch aligning tool.
Slide the clutch aligning tool into the clutch hub.
TOOLS
1
Alignment tool for 15-19 mm
inner diameter of clutch hub
2
Alignment tool for 20-26.6 mm
inner diameter of clutch hub
