SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5 6
e s s a r t S r e s u k r e v e L
ax +49 (0) 2191 / 46438-40
e d . l h a t s w s
@
o f n i : l i a
M - E
d i e h c s
m
e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
91931
Digital Calliper, 150 mm
GENERAL INFORMATION
The digital calliper is used to quickly and accurately measure lengths up to 150 mm.
Any use other than the one indicated is not admissible! Modifications of the product can lead to
inaccuracy and damage which entails the risk of, for instance, short circuit, fire, electric shock, etc.
The operator is solely responsible for all injury to persons and damage to property caused by
improper use.
SAFETY INSTRUCTIONS
The present user manual is part of the product. The manual contains important instructions for
operation and commissioning. Please always enclose the user manual with the calliper, which
applies, in particular, if it is forwarded to third parties.
•
The product must not be dropped or exposed to high mechanical stress, as otherwise the calliper
can be damaged.
•
The calliper must never be exposed to moisture and the impact of heat.
•
Do not operate the calliper in rooms with a presence of flammable gases, vapours or dust.
•
In commercial entities, the accident prevention regulations of the German Employers’ Liability
Insurance Associations must be observed.
•
This device is not intended to be used by persons (including children) with limited physical,
sensory or mental aptitude or lack of experience and/or knowledge unless they are supervised by a
person responsible for their safety or have received instruction from this person as to how the
device is used.
•
Do not use the calliper if it is damaged.
•
Keep the calliper away from children.
SCOPE OF DELIVERY
1x calliper
1x button cell SR54
1x User manual
TECHNICAL DATA
Operating voltage: 1.5 V
Battery: 1x SR54 button cell
Measuring range: 0 to 150 mm
Resolution: 1/10 mm
