SW-Stahl und Werkzeugvertriebs GmbH
Tel. +49 (0) 2191 / 46438-0
F
5 6
e s s a r t S r e s u k r e v e L
ax +49 (0) 2191 / 46438-40
e d . l h a t s w s
@
o f n i : l i a
M - E
d i e h c s
m
e R 7 9 8 2 4 - D
Instruction Manual
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
Warning! DO NOT place foot alignment onto the end of cross shaft
(2), the back bound may cause injury of knee.
Speed spinning mode
Place the handle bar (1) in the middle of cross bar (2), quick spinning
for unscrew the bolt effortlessly.
This mode is free of torque, doesn’t effect of torque setting.
WORK AS A TORQUE WRENCH FOR TIGHTENING NUT
Torque wrench mode
Press the lock / release button (3), slide handle bar (1) to the end of
cross bar (2) and lock.
Note: The torque wrench function is only available in this mode.
Install proper socket onto square head (4) of handle bar (1).
Warning: Please follow torque direction.
Locking / Unlocking mode
Pull slightly the setting / locking knob (7) to unlock (U) and adjust the
torque value by turning.
Release the setting / locking knob (7) will lock (L) by a spring-load
automatically.
Setting the torque value (example 72 Nm)
Pull slightly the setting / locking knob (7) to unlock.
Turn setting / locking knob (7) until desired torque setting is displayed
by cursor (red line) in scale window (5), graduations on the major
scale are in 10 Nm increments and fine setting knob (6) is 1 Nm, odd
number is in the middle between two even numbers.
L
U
