BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Built-in Buzzer:
1. When you press a button. the buzzer will sound a beep if this press is effective.
2. The buzzer will sound several short beeps about one minute before the meter turns off automatically
and will sound a long beep before the meter turns off automatically.
UNDERSTANDING THE DISPLAY
1
2- or 4-stroke engine
2
Data Hold is enabled
3
Cylinder number display which shows the presently selected engine cylinder
number
4
The battery is low and must be replaced immediately
5
Continuity test is selected
6
Diode test is selected
7
USB serial port communication has been turned on
8
Autorange mode is active
9
Relative mode is active
10
Auto power off is enabled
11
Dwell angle measurement is selected
12
Negative sign
13
DC
14
AC
15
Reading display area
16
TRIG +
Positive (+) trigger is selected
TRIG -
Negative (-) trigger is selected