AUX3
max contact rating: 24v, 3W
(transistor output)
AUXILIARY OUTPUTS
The Thalia board has two auxiliary outputs. The first (20 & 21), is
a 24 volt, courtesy light output that will activate upon activation
of the gate, and will remain on for 90 seconds after the gate has
closed.
The second output labeled
AUX 3
(26 & 27), is defaulted as
second channel radio receiver output, but can be re-
programmed to perform any of the following functions under the
LOGIC
sub-menu:
█
█
█
█
20
21
26
27
20
&
21
–
24
VO
LT
CO
UR
TE
SY
LIG
HT
OU
TP
UT
(2
5W
M
AX
)
26
&
27
–
AU
X 3
N.
O.
CO
NT
AC
T
RELAY COMMON
RELAY N.C.
POWER 24V +
POWER 24V -
PROGRAMMING: LOGIC > SAFE 2 > 004 (PHOT CL)
AUX3 > 006
Shadow loop detector
EXAMPLE
: SHADOW
LOOP DETECTOR WIRING
USING AUXILIARY OUTPUT
VALUE
FUNCTION
0
1
2
3
4
5
6
7
8
2ND CHANNEL RECEIVER OUTPUT. Output active when transmitter activates the 2nd channel
GATE OPEN LIGHT. Output active when gate is not closed. flashes while closing
COURTESY LIGHT. Output active during and for 90 seconds after operation.
GATE NOT CLOSED. Output active until close limit is reached
START OF CYCLE. Output active for 1 second at the beginning of each cycle
GATE OPEN ALARM. Output active if gate is held open for more than double the timer to close time
GATE RUNNING. Output active while motors are powered
SOLENOID LOCK. Output active for 2 second at the beginning of open cycle
MAGNETIC LOCK. Output active when gate is closed
21
