OK
+
-
OK
+
-
OK
+
-
STEP 4. Set the number of motors connected
scroll down using the
[-] button and look
for “phob” (phobos)
press [ok] to select
next the screen will
display: “n. mot”
(number of motors).
OK
+
-
if two motors are
connected, press [ok]
while “2” is shown on
the screen
OK
+
-
if only one motor is
connected, press the
[-] button...
STEP 3. Select the type of operator
OK
+
-
… and then press
[ok] to select.
STEP 5. Set the opening direction
OK
+
-
“dir” (direction) will
be displayed for a
second, followed by
“int” (interior)
OK
+
-
select “int” if the
gates open in, or..
OK
+
-
...press [-] and select
“ext” (exterior) if the
gates open out.
QUICK SETUP MENU
STEP 6. Set the desired preset
OK
+
-
“preset” will be
displayed...
OK
+
-
followed by “ar”
use the [-] button to
scroll down and the
[ok] button to select
your preferred preset.
Presets are explained
on the next page.
16
