46 - Espas 20I
D812913 10598_02
15 - MENU 2 PROGRAMMING
Parameter Description
Values
Default
Input
Display of the I/O state connect-
ed to the card: photocells, loops,
etc. ONLY READING
If the input is active, the corre-
sponding code is displayed (see
Values)
0=Ticket request button pressed
1=INOPZ1 input active
2=Ticket slot photocell active (only
with KPM printer)
3=INOPZ3 input active
4=Detection loop active
5=Safety loop active
6=Barrier limit switch active
7=Entry station disabling active
(terminals 12/13)
-
Language
The language used by the station
is used
Change with
UP
and
DOWN
,
confirm with
PUSH
To change the language, use the
EspasConfy software
IT
Address.
Station configuration
Change with
UP
and
DOWN
,
confirm with
PUSH
033=Entry station 1
034=Entry station 2
035=Entry station 3
033
041=Exit station 1
042=Exit station 2
043=Exit station 3
049=Table validator1
050=Table validator2
051=Table validator3
057=Counter panel 1
058=Counter panel 2
059=Counter panel 3
Gate
Station type and name
Change with
UP
and
DOWN
,
confirm with
PUSH
IN1...IN3 = Input 1, 2 or 3
IN 1
EXIT1...EXIT3 = Exit 1,2 or 3
POS1...POS3=Issuer 1,2 or 3
COUNT1...COUNT3 = Kit
NORA 1, 2 or 3
Warmer Thr.
Express the temperature (in °C)
below which the heating resistor
is activated. Change with
UP
and
DOWN
, confirm with
PUSH
0...255
35
To enter menu 2 “ADMIN” when the station is switched on, wait for the firmware version and
the date to appear and press the joystick centrally.
Summary of Contents for Espas 20I
Page 123: ...123 Espas 20I D812913 10598_02 ...
Page 124: ...ITALY ...