BFT Espas 20I, Installation Manual

Page: 43 / 124

43 - Espas 20I
D812913 10598_02
ENGLISH
14 - MENU 1 PROGRAMMING
Parameter Description Settable values Default
DEVICE STATUS
ALARM
The normal operation screen displays
the DEVICE STATUS message “OK”,
while, if there are any alarms, a letter
will be displayed that indicates the
type of alarm.
A: Out of paper OK
If you press
the joystick
centrally, a
test ticket is
printed.
B: Nearly out of paper
D: Head up (KPM)
E: Printer door open (KPM)
G: Com. error 232 (KPM)
H: Printer supply voltage (KPM)
I: Paper jam
M: Cutter error (KPM)
O: Slot photocell busy (KPM)
P: Printer not connected
WORK The active operating mode. Change
with
UP
and
DOWN
, confirm with
PUSH
NORMAL NORMAL
OPEN
CLOSED
ON LOOP
SUBSCR.O.
TICKET O.
GRACE TIME The exit time, in minutes (for Espas
20 U exit after paying) Modify with
UP and DOWN , confirm with PUSH.
SEE 14.1
0...255 0
OPERATOR CARDS
This submenu displays and allows
setting 400 operator cards. SEE 14.2
1-4: NORMAL -
5-8: OPEN
9-12: CLOSED
13-16: LOOP
17-400: PASS
CLEAR COUNTER Function used to clear the antipassback on all registered cards. Press PUSH to clear the an-
tipassback
DATE
The current date in dd/mm/yy format
It is the date displayed and printed on the ticket. SEE 14.3
TIME The current time in hh:mm:ss format
It is the time displayed and printed on the ticket.
SEE 14.4
TEMPER
. Current temperature in °C. ONLY READING
How to use the joystick:
UP
: move the button upwards
RIGHT
: move the button to the right
DOWN
: move the button downwards
LEFT
: move the button to the left
PUSH
: press the button