3
Caution
Unit
- Grasp cord by the plug to remove from the outlet. Do not pull or yank the cord itself. It may cause
the wire to malfunction.
- Care should be taken not to place the AC cord near a gas burner. Never attempt to repair a burned
motor cord. Always replace it with a new cord.
- Prior to use, always check for vibration, noise and overheating. If any abnormalities are detected,
stop using immediately and contact your dealer.
- Be careful not to spill water onto the unit as it may result in a fire or an electric shock due to a short
circuit.
Motor, Hand piece
- Do not use this product under strong stress for extended periods of time. It can cause overheating.
- Do not connect or disconnect the cord until the drive motor has completely stopped.
- Do not connect/disconnect the hand piece during operation.
- Verify that the Speed Control Switch is adjusted within the allowable speed before use.
- Connect only 4-hole, 5-hole or 6-pin tubing.
- Air Requirements: Dry, free from contamination and oil. Use a compressor with a dry air system/
Install an air filter if necessary/ Blow out the lines before installation.
- Do not autoclave (or any other high temperature sterilization) Control Box, AC Adaptor, Motor Code.
- The user shall be responsible for operation and maintenance and inspection.
Notice
During rotation, the motor and motor cord may affect computer and LAN cables. Noise could be heard
during operation near radio receivers.
After treatment, immediately turn the power and air supply off. Remove the power cord if the unit is
not to be used for a long time.
1. Specifications
Model
Maxso E600P
Speed
2,000 ~ 40,000 rpm
Torque
3.4 Ncm
Rated Input
AC 24V / DC36
Noise Level
<60dB
Dimensions
W127 x D149 x H54 (mm)
