9
Figure 9:
Connect the power cord of
the instrument tray (C3/C4 external
power supply access position)
Figure 10:
Turn on the compressor
using the red knob. Gauges are visible
to monitor compressor pressure. The
optimal pressures provide optimum
efficiency and safety of the unit.
Pressure gauge should indicate
between 80 psi (5.5 bar) and 108
psi (7.5 bar). The compressor will
automatically stop when the pressure
reaches 108 psi (7.5 bar).
Figure 8
Figure 9
Figure 10
Figure 8:
Connect the power plug of
the power and press the main power
switch (when the low power supply
voltage and load startup, may trigger
overload protector to cut off the motor’s
power. At this time, the device needs
to stand for approximately 10 seconds
to cool down the protector. You may
then press the reset button, the
machine will return to normal.)