Beyerdynamic UNITE CR, Quick Start Manual

Page: 10 / 36

Unite CR – Cockpit Rack
10
5. How to operate the charger
The Unite Cockpit Rack can be mounted into a 19" rack. It is used for charging the rechargeable batteries
inside the Unite transmitters and receivers as well as transmitting the pairing information from the
transmitter to the receivers.
The Unite CR-12P version has 3 charging units, each with 4 charging compartments so that a maximum of
12 bodypack transmitters or receivers can be charged simultaneously.
5.1 Rack mounting
• The charger is provided with holes on the left and right hand side for 19" rack mounting.
• Insert the charger into the 19" rack and tighten it with four screws (not included in the delivery).
Warning!
• When installing the charger into a 19" rack or with other devices into a rack, the ambient temperature, the
mechanical stress and the electrical potentials will be different than for devices that stand separately.
• If you install more than one charger into a rack, you should make sure that there is an appropriate
ventilation (e.g. through ventilation panels), because of the heat between the chargers.
• The ambient temperature of the rack must not exceed the temperature specified in the technical
specifications.
• Make sure that the rack is not top-heavy with too many devices and will not overturn.
• When connecting to the power supply read the information on the typeplate
. Avoid overloading
circuits. If necessary, provide an overcurrent protection.
5.2 Mains connection
• Connect the IEC connector of the power cable to the mains connection of the charger. Connect the
power plug to a power outlet.
• Switch on the charger via the on-off switch .
• When not in use, switch off the device.
• If the device is not used for a longer period of time, disconnect the power plug from the power socket.
Make sure that you do not pull on the cable, but on the power plug.