Beyerdynamic UNITE CR, Quick Start Manual

Page: 4 / 36

10. Protect the power cord by not walking or standing on it or pinching, this is considered for plugs
especially where they exit from the device.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
device. When a cart is used, use caution when moving the cart/device combination to avoid injury from
tipping over.
13. Unplug this device during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the device has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the device, the device has been exposed to rain or moisture, does not operate
normally, or has been dropped.
Location
• The equipment must be set up so that the mains switch, mains plug and all connections on the rear of
the device are easily accessible.
• If you transport the equipment to another location take care to ensure that it is adequately secured and
can never be damaged by being dropped or by impacts on the equipment.
Fire hazard
• Never place naked flames (e.g. candles) near the equipment.
Humidity / heat sources
• Never expose the equipment to rain or a high level of humidity. For this reason do not install it in the
immediate vicinity of swimming pools, showers, damp basement rooms or other areas with unusually high
atmospheric humidity.
• Never place objects containing liquid (e.g. vases or drinking glasses) on the equipment. Liquids in the
equipment could cause a short circuit.
• Do not install near any heat sources such as radiators, heat registers, stoves or other device (including
amplifiers) that produce heat.
Unite CR – Cockpit Rack
4